Mediacom 2.6

Specially accomplished to work in conjunction with mediabox' serial firmware downloader.
To download firmware to the box:

1. Open desired COM port.
2. Run firmware bootloader on the box (menu->8->5 for OFM). You should see 
	*** BCT-1530 serial DL ready ***
   at the trace window and "dLSr" on the box' LED display.
   If something is wrong then consult a community ;)
3. Click the button 'Firmware', choose a firmware (or patch) file to download.
4. Choose box' model or directly enter the address at which you are going to write this firmware or patch.
5. Wait for completition and watch the trace window, if everything is OK then you should see 'Done' here.
   Downloading process is quite fast (about 6 seconds per flash sector, so 1-2 minutes for the entire firmware).
6. Close COM port at the end, and box should reboot.


Send bug reports at "Pioneer Reverse engeneering" (http://dynamit.dvb.lv/messageboard/index.php).

2006-10. deemonru